What is conduit wiring?

What is conduit wiring?

Conduit wiring is the greatest wiring solution among the several forms of electrical wiring. Conduit wiring is accomplished by the use of a conduit, which is basically a channel or tube that provides a passage and protection for the electrical wire. The opening in the side of the conduit is called a "joint" and any connection between wires going into it is called a "conduit joint." Any connection with wires coming out of it is called a "termination joint."

The advantage of this method of wiring is that it protects the insulation on the conductor from damage due to exposure to moisture or other elements. The conductors are enclosed within the conduit and cannot be exposed to these elements. If water enters the conduit, it will not reach the conductors because they are sealed off from it. This method also makes changing cables or adding new ones easy. Simply pull out the old cable, cut it back at least 12 inches away from the wall, remove the end cap, insert the new cable and push it all the way down to the floor or ground plane if there is one. Then replace the end cap and you're done!

This method is used mostly for power wiring and should be used for all circuits that carry electricity. These include: lights, heaters, air conditioners, fans, and any other appliance that uses electric current to work.

What is the purpose of the conduit?

An electrical conduit is a tube that houses electrical wires for a number of structural or construction applications. Conduit protects cables as well as anybody who may come into contact with the wires. It also provides ventilation to help prevent damage due to heat or fire.

There are two types of electrical conduits: metal and plastic. Metal electrical conduits provide protection and support for cables while giving them space to move if they ever need to be moved or replaced. These are usually made out of steel or aluminum. Plastic electrical conduits are simply tubes made out of polyvinyl chloride (PVC) or other similar materials. They do not carry electricity, so they do not need to be connected to any voltage source.

Conduits can be used for internal wiring in buildings. In this case, they are often called "raceways". Raceways can be used instead of running individual wires throughout a building's interior. This saves money by using existing holes in walls or floors as paths for electricity to travel along.

Conduits can also be used for exterior wiring on buildings. In this case, they are usually called "pencil marks". Pencil marks are openings that allow electricians to mark locations for future work (such as where to cut into a wall to run additional cables).

What type of wire is used in conduit?

Conduit Wiring Is Used Non-metallic (NM) or Romex cable is the most often used type of cable in household wiring. While NM wire may be routed via a conduit, it is rarely done. THHN and THWN wire are the most regularly used wire kinds within conduit. Other types of wire can be used, but they are less common.

The main advantage to using conduit for electrical wiring is the protection it gives against damage from physical abuse. For example, if an area's wiring is exposed and someone trips over it, it won't cause as much damage to personal property or injury to people if it is inside conduit.

Another advantage is that by putting cables in conduit, you are able to run them along exterior walls without having any risk of these wires coming into contact with outdoor elements such as soil or water. This helps prevent corrosion from occurring on metal wires and also protects them from accidental damage.

Last, but not least, is the ability to organize wiring. By placing cables in conduit, it is easy to see what needs to be fixed or replaced before it causes power outages or other problems with your home's electronics.

There are several different types of conduit available on the market today. Each type is appropriate for certain situations where cost is an issue or where design flexibility is needed.

About Article Author

Chris Dutcher

Chris Dutcher's passion is cars. He has an engineering degree from Yale University, and he likes to work on cars in his free time. He has been working as a mechanic for the past 8 years, and he loves it!

Disclaimer

EsWick.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Related posts