Other connections that require maintenance or are wrongly built might create shocks, short circuits, and other hazards. This is just another reason why Wago connections are an excellent choice. They satisfy all NEC code criteria for splicing and terminating conductors. In addition, the wago connection tool is small enough to be handled by a single person and will not damage conductors when made properly.
Wago connections are easy to make and accurate. There's no need to measure before making each connection, which saves time. And because there's no mechanical force needed to make the connection, it's pain free for you and your workers.
The wago connection tool is also very affordable. Not only does it meet code but it is also much less expensive than other tools on the market. For these reasons, wagos are becoming more popular every day with electrical contractors.
Wago connections are durable too. They were designed to handle heavy use in any type of application from residential to commercial. Because they're made from brass, they'll also last longer than metal connectors if you choose to paint or cover them up with color. However, brass gets hot during use so care should be taken not to burn yourself when working with them.
In conclusion, wago connections meet code and are affordable. They're also durable and easy to use.
Wago connectors allow for the rapid and easy connection of two or more pieces of electrical wire, providing a hassle-free option to save time on the job. They are reusable, have integrated test points, and are vibration resistant, ensuring a stable and secure connection. The connectors come in a variety of sizes to match your needs.
Wago 222 and 221 wire-to-wire connections provide several advantages. Wago connectors, unlike push-in wire connections, may be used for solid, stranded, and fine stranded wires or conductors and are reusable. The connector may be removed from the cable by simply pulling it off.
Wire-to-wire connections using Wago connectors can be made in the field with ease because there is no need to strip any insulation from the conductor before making the connection. This is especially useful when working with cables of which some or all of the insulation has been removed due to corrosion or other causes.
The Wago design provides two parallel rows of contacts that clamp around the conductor. Each row has 20 contacts and they connect together when pushed down onto the cable jacket. There is no need for special tools to make these connections and they can be done from either end of the cable.
Wago connectors are commonly used in applications where electrical resistance between components is not important such as for data communications cables. However, due to their clamping force on the conductor, they can also be used where vibration is an issue, such as with power transmission cables. They are very compact and lightweight compared with other connectors available on the market today.
Wago connectors use plastic injection molding technology to produce the connectors.
With their splicing connections, Wago makes splicing stranded, fine stranded, and solid stranded conductors for electrical installation simple. You are ready to start once your wire has been stripped to the right length, which can be located under the bottom of the connection. Stranded conductor needs to be properly prepared by stripping its outer insulation layer to reach the metal core.
The best way to determine if a Wago connector will work with your stranded wiring is to try it. However, we recommend that you do not use them with armored cable because the strain relief does not provide enough support for the cable wires. Also, avoid connecting equipment to these connectors that could cause tension on the cable or connecters.
Wago offers several options for terminating stranded conductors. They include screw-type connectors, snap-type connectors, and loom-type connectors. Each type has its advantages and disadvantages. For example, screw-type connectors are easy to install but they can be difficult to remove without cutting the conductor first. Snap-type connectors are very easy to disconnect but hard to re-connect without special tools. Looms on the other hand can be used for temporary repairs and they can also be used with aluminum conductors. But beware, don't use any tool to pull cable into the connector! The pressure from doing so could cause the conductor to split.
Wagos are the Stab-Lok breakers and back-stab receptacles of the game. Their contact surface area is substantially less than that of a wire nut, and their gripping strength is significantly less than that of a correctly placed wire nut. All it takes is a short tug and twist to separate the connections. However, they do provide a quick way to connect or disconnect cables without using tools.
This fact alone makes Wago connectors useful for temporary repairs where you don't want to spend time finding matching terminals or screwing everything together properly. Of course, if you need to make those connections permanent, a better choice would be to use proper cable glands or splices.
Also, Wago connectors can be used instead of zip ties for making temporary attachments while searching for the right tool or material. If you need to attach one end of a cord or rope for a few hours until you find a suitable tool, a Wago connector is an easy solution.
They're also handy for attaching small items that might not fit in a junction box or on a panel. For example, you could use a Wago connector to attach a light fixture to a beam when building a fence. The weight of the fixture will hold it in place while you build the fence around it!
Wago connectors are commonly used by homeowners to repair outdoor lighting wiring when replacing old fixtures.